If you don't get it right you Kart will not turn but plough straight ahead. Getting the steering geometry correct on your Kart is one of the most important consideration when designing the frame. Engine (We are using a mower engine which you can off an old mower or look on eBay for a few dollars).Seat (You can use any seat you can find but we are using a fiberglass seat.Steering Wheel (You can get a cheap second hand wheel for about $20 on eBay).4 Tires (You can find these on eBay, a new set can cost up to and over $300, but if you get a used set they can cost less than $100 or free).A used set can cost you up to and over $100 on eBay) 4 Wheels (These can be quite expensive, new and second hand.Mechanical Brake Caliper With Brake Pads & Cable.Axel (You can find these second hand on eBay for about $50 or new for $150 - $200).I recently bought a number of parts from cut price racing, they have almost everything you will need and their service was excellent.lots of 6mm and 8mm nuts and bolts Parts you will need: (Screen shot are includes as the ebay links can go dead) Materials you will need: 25 or 30mm Square Steel Aluminum Sheet 1.6mm thick 19mm and 25mm Steel Tubing 25mm solid 30mm bright solid (If you want to make your rear axle) 13mm tube or pipe. The first thing you need to do is to gather all the parts, as it makes it much easier to design if you can lay out all the parts where they will be on the kart and kind of "join the dots".
0 kommentar(er)
